• +(91)-80-67424920
  • sales@indiaclipnclimb.com
Healthy challenging fun for everyone

Trublue

TRUBLUE 2 AUTO BELAY

The TRUBLUE ® Auto Belay is the next generation of indoor and outdoor auto belays. Designed for the climbing industry.

Product Specification: Device Dimensions: 15 in x 12.6 in x 5.5 in (380 mm x 320 mm x 140 mm) Device Weight: 42.5 lbs (19.3 kg)

TRUBLUE Speed 12.5m (41ft) / 16M (52.8FT)

Product Specification: The TRUBLUE Speed 12.5m Auto Belay has the same reliability and quality reputation as the TRUBLUE but offers fast retraction specifically for speed climbing competitions and training.

Dimensions: 37 x 33 x 23 cm (15 x 13 x 9 in)
Device Weight: 18.5 kg (40.8 lbs)
Rated Working Capacity: 10 to 150 kg (22 to 330 lbs)
Retraction Time: 2.7 sec on a 10m wall, 3.5 sec on a 15m wall
Retraction Time (15m): 3.5 sec at 15m

TRUBLUE XL AUTO BELAY - ALUMINUM CARABINER

Product Specification: Designed for higher walls, accommodates heights up to 65 feet.
Device Dimensions: 15 in x 12.6 in x 5.5 in (380 mm x 320 mm x 140 mm)
Device Weight: 42.5 lbs (19.3 kg)
Maximum Descent Velocity: 6 ft/s (1.8 m/s)
Maximum Descent Height: 65 ft (19.8 m)


Trublue Accessories

SELF BELAY

Product Specifications: The Self Belay is an auto belay accessory that eliminates accidental climber webbing releases and removes difficulty of pulling down webbing to clip in.
Width: 63 mm
Depth: 27mm
Minimum Breaking Strength: 20 KN axial load

MOUNTING KIT FOR TRUBLUE AND QUICKJUMP

Product Specification: This turnkey kit is for single-point mounting of your TRUBLUE Auto Belay or QUICKjump Free Fall Device.

Kit contains:
2 Steel Locking Carabiners
1 segment of 3/8 inch chain that is 2 foot (60cm) in length
1 16mm CAMP Express Nylon Runner that is 2 foot (60cm) in length

BELAY GATE

Product Specifications: The Belay Gate is a simple way to reinforce the proper use of auto belay devices and minimize risk from climbing error. While not in use, the auto belay clips into triangular Belay Gate, blocking the initial foot holds and hand holds of a climbing lane.

1/4" Foam
48 inches wide x 41 inches tall (1219 mm wide x 1041 mm tall)
Lower webbing straps adjust from 1-17 inches (25-432 mm)
(Available in Yellow, Orange, Blue & Green Colour)

UNIVERSAL MOUNT

Product Specification: The Universal Mount is a mounting device designed specifically for use as a climbing anchor.

2017 Clip N Climb. All rights reserved | Design by Kavity Devices